Resin Rockers® Soft Coat UV Resin Bundle with Plug Casting Mold For Snow Globe Tumblers (With or without Corks)

The Little Isla Co is an official Resin Rockers® retailer, and feature on the Resin Rockers Stockists on their website! Resin Rockers® have some amazing quality products which will change your crafting game so I am HONOURED to be the first UK Stockist!

---------------------------------------------------------------------------------------

Introducing Resin Rockers® Soft Coat UV Resin! Formulated to topcoat stickers, flexible material, and cast plugs for snow globe tumbler holes.

Kit with corks includes:

• 100g bottle of Soft Coat UV Resin
• Snow globe tumbler plug casting mold Mold includes 2 sizes - 5/16" (approx 8mm) & 1/4" (approx 6mm)
• Also fits pre-drilled glass snow globe tumbler blanks with 5/16” or 1/4” sized hole drilled
  
• Resin Rockers Exclusive Snow Globe Tumbler Cork Plugs - 2 Corks Fit: 8mm (5/16) inch drilled hole

Kit without corks includes:

• 100g bottle of Soft Coat UV Resin
• Snow globe tumbler plug casting mold Mold includes 2 sizes - 5/16" (approx 8mm) & 1/4" (approx 6mm)
• Also fits pre-drilled glass snow globe tumbler blanks with 5/16” or 1/4” sized hole drilled

FAQs and Tips:

• WORKS BEST WITH 36-54W UV LED LAMP
• CASTING - CAST INTO RESIN ROCKERS PLUG MOLD. CURE FOR 60 SECONDS ON BOTH SIDES. GENTLY PRESS PLUG INTO A 5/16" or 1/4" HOLE
• LAYER HARD COAT UV RESIN ON TOP TO SEAL OVER PLUG AND CURE. THEN POUR FINAL LAYER OF HARD COAT UV RESIN TO FILL BOTTOM OF TUMBLER COMPLETELY
• COATING - APPLY LAYER ON SURFACE AND REST 5 MIN. USE HEAT TO ELIMINATE BUBBLES. CURE FOR 120 SECONDS.
• STORE BOTTLE OUT OF DIRECT SUNLIGHT AND IN A COOL PLACE

PLEASE READ:  Your safety is our #1 priority so it is important you follow all precautions. This goes with any brand of UV Resin.

• Age recommendation for use is 15+
• Wear nitrile gloves to protect the skin in case of an allergy
• Wear a mask if you have respiratory sensitivity. All brands of UV Resin can let off fumes when it first starts to cure. It is the chemical reaction that occurs when the UV light penetrates the resin itself. We always recommend safety precautions with any chemical product.
• Work in a well-ventilated area